{"product_id":"bad-cat-unleash-v3-attenuator-re-amp-analog-di","title":"Bad Cat Unleash V3 Attenuator Re-Amp Analog DI","description":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eThe Bad Cat Unleash V3 is a versatile amplifier management system that combines reactive load attenuation, 100-watt re-amplification, and Purepath analog direct output in a single unit. Designed to give guitarists greater control over their amplifier's volume and performance, the Unleash V3 allows high-wattage tube amps to be driven into natural power-tube saturation at manageable listening levels while giving smaller amplifiers the ability to deliver significantly greater stage volume. With a 150-watt reactive load, dual footswitchable channels, a post-power-amp effects loop, and balanced analog speaker simulation, the Unleash V3 provides a flexible solution for live performance, recording, rehearsal, and home practice.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Unleash V3's reactive load attenuation allows players to push their tube amplifiers into the sweet spot where power-tube compression, harmonic saturation, and dynamic response become part of the sound. Rather than reducing the amplifier's output before the power section, the Unleash V3 accepts the amplified signal through its reactive load and provides independent control over the final listening volume. Its 150-watt reactive load supports 4-, 8-, and 16-ohm amplifier configurations, making it compatible with a wide range of tube amplifiers. This allows players to achieve the driven character of a powerful amplifier at lower volumes without relying exclusively on preamp distortion or sacrificing the response of the power section.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBeyond attenuation, the Unleash V3 features an ultra-transparent 100-watt solid-state re-amplification stage designed to increase the available volume of lower-wattage amplifiers. Players can drive a small tube amplifier into its natural overdrive range and use the Unleash V3 to reproduce that sound at significantly higher output levels. This makes it possible to retain the character of a low-wattage boutique amplifier while gaining the clean headroom and volume needed for larger performance environments. An input trim stage with clip indicator LEDs helps optimize the incoming signal, while two independent channels provide dedicated Volume, Low, and High controls for tailoring the output to different playing situations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe dual-channel design makes the Unleash V3 particularly useful for live performance. Each channel features its own volume and two-band EQ, allowing players to configure separate rhythm and lead settings without changing the amplifier's core tone. The included footswitch provides convenient hands-free switching between the two channels. A post-power-amp serial effects loop allows delays, reverbs, modulation pedals, and other external processors to be placed after the amplifier's power section, even when the amplifier itself does not have a built-in effects loop. An Instrument\/Line level switch helps accommodate different types of external effects equipment, expanding the Unleash V3's compatibility with pedalboards and rack-based processors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor direct recording and live sound applications, the Unleash V3 incorporates Bad Cat's Purepath analog speaker simulation technology. Its balanced XLR direct output provides a cabinet-voiced signal for connection to a mixing console, recording interface, or front-of-house system without digital conversion or processing latency. Selectable Edge and Center cabinet voicings allow players to choose between different simulated microphone positions, providing additional control over the direct signal's tonal character. Because the simulation is entirely analog, the system maintains an immediate response while offering a practical alternative to conventional microphone-based speaker capture.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Unleash V3 also includes a dedicated headphone output with independent volume control for quiet practice and monitoring. Two 1\/4\" speaker outputs provide flexibility when connecting external cabinets, while the compact enclosure makes the unit practical for studio setups and performance rigs. Measuring 10\" wide, 9\" deep, and 4\" high and weighing 8.5 pounds, the Unleash V3 combines multiple amplifier management functions in a manageable format. Whether used to tame a powerful tube head, amplify a small boutique combo, or send an analog cabinet-simulated signal directly to a recording system, the Bad Cat Unleash V3 offers a comprehensive solution for controlling amplifier tone and volume.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHighlights\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eThree-in-one amplifier management system with reactive attenuation, 100-watt re-amplification, and Purepath analog DI\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e150-watt reactive load with 4-, 8-, and 16-ohm compatibility\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDual footswitchable channels with independent Volume, Low, and High controls\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePost-power-amp serial effects loop with selectable Instrument\/Line level\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eBalanced Purepath XLR direct output with Edge\/Center cabinet voicing and dedicated headphone monitoring\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eGeneral\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eBrand: Bad Cat\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eModel: Unleash V3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eProduct Type: Reactive Load Attenuator \/ Re-Amplifier \/ Analog DI\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePrimary Functions: Attenuation, Re-Amplification, Direct Output\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eReactive Load Power Handling: 150 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRe-Amplification Power Output: 100 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003ePower Amplifier Type: Solid-State\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eReactive Load Impedance Compatibility: 4, 8, and 16 Ohms\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDirect Output Technology: Purepath Analog Speaker Simulation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eAttenuation and Re-Amplification\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAttenuator Type: Reactive Load\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMaximum Reactive Load Rating: 150 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSupported Amplifier Impedances: 4 \/ 8 \/ 16 Ohms\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRe-Amplification Power: 100 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRe-Amplification Design: Ultra-Transparent Solid-State\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInput Trim: Adjustable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInput Clip Indicators: LED\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIndependent Output Volume Control: Yes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDual-Channel Operation: Yes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eChannels and Controls\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNumber of Channels: 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eChannel Switching: Footswitchable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eChannel 1 Controls: Volume, Low, High\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eChannel 2 Controls: Volume, Low, High\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInput Trim Control: Yes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eInput Clip Indicator LEDs: Yes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eHeadphone Volume Control: Independent\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFootswitch: Included\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eEffects Loop\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Loop Type: Serial\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Loop Position: Post-Power-Amp\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Loop Send: 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Loop Return: 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Loop Level Selection: Instrument \/ Line\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eExternal Effects Compatibility: Pedals and Line-Level Processors\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDirect Output and Speaker Simulation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDI Technology: Bad Cat Purepath\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDirect Output Type: Balanced Analog XLR\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSpeaker Simulation: Analog\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCabinet Voicing Options: Edge \/ Center\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDigital Conversion: None\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDigital Processing Latency: None\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDirect Connection Compatibility: Mixing Consoles, PA Systems, Recording Interfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInputs and Outputs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAmplifier Input: 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Send: 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Return: 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eBalanced Direct Output: XLR\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eHeadphone Output: 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSpeaker Outputs: 2 x 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFootswitch Input: 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSpeaker Output Configuration: Dual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHeadphone Monitoring\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eHeadphone Output: Dedicated 1\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eHeadphone Volume: Independent Control\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSilent Monitoring Capability: Yes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDimensions and Weight\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eWidth: 10\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDepth: 9\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eHeight: 4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eWeight: 8.5 lbs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eMiscellaneous\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eBrand: Bad Cat\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSeries: Unleash\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eVersion: V3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eReactive Load Rating: 150 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRe-Amplification Rating: 100 Watts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSupported Impedances: 4 \/ 8 \/ 16 Ohms\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eNumber of Channels: 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eChannel EQ: Independent Low and High\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eEffects Loop: Post-Power-Amp Serial\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAnalog Cabinet Simulation: Yes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCabinet Voicing: Edge \/ Center\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIncluded Accessory: Channel Footswitch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWhy Buy from Tone Shop Guitars?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTone Shop Guitars is an independent Bad Cat dealer with locations in Addison, Southlake and Fort Worth, Texas. We offer free nationwide shipping on new gear and multiple financing options.\u003c\/span\u003e\u003c\/p\u003e","brand":"Bad Cat","offers":[{"title":"Default Title","offer_id":50354619973889,"sku":"UnleashV3","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0856\/7056\/files\/UNLEASH-V3-120V.jpg?v=1794237044","url":"https:\/\/www.toneshopguitars.com\/products\/bad-cat-unleash-v3-attenuator-re-amp-analog-di","provider":"Tone Shop Guitars","version":"1.0","type":"link"}